Child_pages_training

Training Center

Clifford Power Systems is committed to providing the best products and services to our customers and dealers.

 

We here at Clifford Power Systems Inc. are strong believers in the importance of training. We not only train our own employees, we have several training offerings for Customers and Dealers. Whether you’re an Engineer looking for continued education credits, Generac Dealer looking to get certified, or a Customer who wants to increase their knowledge in power generation, we hope you’ll find what you’re looking for here at Clifford Power.

As a Generac® Industrial Distribution Central (IDC), Clifford Power Systems, has several Generac®certified trainers on-hand who are qualified and authorized to train multiple Generac® certification classes. These classes are designed by Generac and are a requirement of Dealers who want to Service the Generac product line. However you do not have to be a Generac Dealer to attend this class. This class is open to anyone that wants to gain knowledge on these product lines.

Whether you need a quote, need to schedule service, are interested in training, or want to browse our information sheet library, we are here to help.

We want to make it easy to do business with Clifford Power Systems, and find easy ways to answer your questions.

Check back often as we continually update our offerings to improve your customer experience.

 

Customer Training:


2014 Generac Training Schedule (PDF)

2014 Training Registration Form (PDF)

Clifford Pre Air Cooled & Basic Install – 1 Day ($300.00) – The first half of this 1-day course is a preparatory class for the Generac Air Cooled Certification Course, and the second half covers the basic installation of single generator systems. This 8 hour course starts at 8:00am covering basic electricity, schematic reading, generator theory and gaseous engines. Then after returning from lunch we will cover basic installation of single generator systems. This will include sizing the generator appropriately according to load demands, location of unit, fuel supply and electrical interconnections.

Generac Air Cooled – 2 Day ($650 per seat) – This 2-day class allows a technician that is assigned to an appropriate service dealer to perform warranty repairs on all Generac Air-cooled products.  This class covers basic electrical and generator theory, operation of generator controls, fuel systems, and air cooled engines.  Hands on lab time include troubleshooting of the generator and transfer switch using schematics and wiring diagrams.   (You do not have to be a Generac Dealer to attend this class, it’s open for anyone wanting to gain knowledge on the Generac Air Cooled product.)

Generac Protector Series – 2 Day ($750 per seat) – This 2-day class allows a technician that has successfully completed the Commercial 1 class, and is assigned to an appropriate service dealer to perform warranty repairs on Generac Protector Series product.  This class covers the Protector Series units.

Generac Commercial – 5 Day ($1250 per seat) – This 5-day class allows a technician that is assigned to an appropriate service dealer to perform warranty repairs up to 150 kW Generac gaseous products, non configured, Nexus, no H-panel, and the Protector Series.  This class covers single and three phase generator theory, voltage regulation, fuel and ignition systems, Nexus control panels, Protector Series units, and RTS transfer switches.  Hands on lab time include troubleshooting of the generator and transfer switch using schematics and wiring diagrams.

Generac Commercial 2 – 5 Day ($1250 per seat) – This 5-day class allows a technician that is assigned to an appropriate service dealer to perform warranty repairs up to 150 kW Generac gaseous products, non configured, including H-panel.  This class covers single and three phase generator theory, voltage regulation, fuel and ignition systems, Nexus control panels, HTS transfer switches, HUIO modules, and Remote annunciator panels.  Hands on lab time include troubleshooting of the generator and transfer switch using schematics and wiring diagrams.

Generac Commercial Update – 3 Day ($850 per seat) – This 3-day class allows a technician that has taken the Commercial 2 class and is assigned to an appropriate service dealer to continue to perform warranty repairs up to 150 kW Generac gaseous products, non configured, including H-panel.  This class covers a review of single and three phase generator theory, voltage regulation, fuel and ignition systems, Nexus control panels, HTS transfer switches, HUIO modules, and Remote annunciator panels.  Hands on lab time include troubleshooting of the generator and transfer switch using schematics and wiring diagrams.

Basic Install – 1 Day ($300 per seat) – This 1-day class covers basic installation of single generator systems.  This includes sizing the generator appropriately according to load demands, location of unit, fuel supply, and electrical interconnections.

Clifford End User Training – 1 Day ($300 per seat) – This 1-day class is to assist critical users performing Weekly and Monthly checks needed to comply with regulatory agencies, and basic maintenance.

NOTE: Classes are not limited to Generac® Dealers. They are open to anyone who would like to attend. 

For more information on the Generac® Certification Training visit http://www.generac.com/service/fieldtraining/. Select the product line you are interested in.

Professional Development for Engineers:

These courses were developed for practicing Design, Sales and Consulting Engineers involved in supplying standby power to commercial, industrial, municipal and health care facilities.

Learn more about programs and education for engineers  Generator Education for Engineers

Interested in being Generac ® Dealer?

Check out Generac’s® Become a Dealer section for more information.

Need Parts or Service?

Visit our Parts page or email: parts@cliffordpower.com

Visit our Service page or email: service@cliffordpower.com

Our Training location(s):

Tulsa, OK – 9310 E. 46th St. N. Tulsa, OK  74117

Garland, TX (DFW) – 2913 National Drive, Garland, TX  75041

Kansas City, KS – 211 E Marley Rd, Kansas City, KS  66115

St Louis, MO – 53 Millwell Court, Maryland Heights, MO  63043

Questions? Email: training@cliffordpower.com